Mild steel angles stand out as silent architects in the busy world of construction; their different shapes represent strength and adaptability. These simple parts—which come in stainless steel 304 and other variants—go beyond their technical specifications to become essential parts of machinery, frames, bridges, and storage shelves.
MS Angels are used in the production of truck trailers, EOT cranes and gantries, escalators and elevators, shipbuilding, factory sheds, bus bodies, communication and transmission towers, conveyors, boilers, agricultural equipment, bridge and scaffolding construction, and many other fabrication and engineering industries.
Let’s understand the importance and uses of these mild steel angles in the construction industry.
An MS angle, sometimes referred to as a mild steel, is an L-shaped cross-section that is used in the construction of several homes and structures. Angles made of mild steel that form a 90-degree angle with two equal sides in length and width are far more common. Equal angles are defined as having equal sides, but unequal angles are defined as having one side that is greater than the other with the same thickness.
These angles are well known for their exceptional strength, resistance to corrosion, and longevity. They are the best option for a variety of construction tasks since they are also reasonably priced. Other than the Equal angled and unequal angled, there are various other types of MS angles, such as:
MS T sections are the most widely used steel structural items in a variety of engineering, fabrication, and construction tasks. The classification of “T” shape sections includes light, heavy, unequal, and other imported profiles, as well as rolling sections.
The V-shaped MS angle is highly regarded for its excellent mechanical strength, durability, and flawless polishing. They are usually used in construction as structural or supporting elements.
Indian Standard Bulb Angle is an angle created when the end of an angle’s leg is linked in the shape of a tiny bulb. In terms of bulb angle, the bulb is joined to a flattened steel web, which is then connected to a flange made from the same material.
Based on how the surface is treated, angle steel is available in three different finishes: painted, hot-dip galvanised, and black (untreated).
Mild steel angle has many benefits in structural engineering. Under severe loads, its exceptional strength-to-weight ratio guarantees structural integrity and safety.
There are numerous sizes, grades, and finishes for MS angles. This variety in sizes leads like
| Size (mm) |
| 25x25x3 |
| 25x25x5 |
| 25x25x6 |
| 35x35x3 |
| 35x35x4 |
| 35x35x6 |
| 40x40x5 |
| 40x40x6 |
| 50x50x5 |
| 50x50x6 |
| 75x75x6 |
| 75x75x8 |
| 90x90x6 |
| 90x90x8 |
| 100x100x8 |
| 110x110x10 |
| 110x110x12 |
| 130x130x10 |
| 130x130x12 |
| 150x150x12 |
| 150x150x16 |
Also, the various available shapes like L, V, and T help both engineers and ordinary people to use them extensively.
MS angles have outstanding adaptability, which is one of their many benefits. Its low carbon content allows for easy drilling, cutting, and welding, making it ideal for a variety of applications, including construction. In addition, they show remarkable extension, toughness, and rigidity. Depending on how they are used and the qualities they are constructed with, these can also be chopped and used.
Depending on how they are used and the qualities they are constructed with, MS angles can also be chopped and used. When it is required in large quantities, it can be produced at a much lower cost than coloured steel, with results that cannot be matched.
Due to its high degree of recyclable nature, it has also been shown to be an affordable and environmentally friendly material for making both small and large components for goods in almost every industry.
MS angles are widely used in:
A lot of buildings, bridges, and other infrastructure projects are built using MS Angle Sheets. Because of their strength and adaptability, they are used for supports, framing, and other structural components.
MS Angle Sheet is used to make frames, brackets, and supports for machines in industrial processes, as well as various farm equipment and their parts. Because of their malleability and weldability, they are perfect for unique components in a variety of industries.
MS Angle Sheets are used in the automobile industry to make vehicle frames, chassis, and support structures.
MS Angle Sheets are used to make racks, shelves, and structural supports in warehouse and storage systems because of their high tensile strength.
MS angles range in size from 25253 mm to 130 130 12 mm and are composed of a flange and a web. It is possible to determine the weight of an MS angle in kilograms per foot or kilograms per metre. The weighted value of higher dimensions is greater than that of lower dimensions. To calculate the weight of an MS angle, you can follow the listed below steps:
You don’t need to worry, though, if equations and numbers confuse you. There are lots of angle weight calculators that are easily available on the internet, where only the specifications of the MS angles are to be entered to calculate the MS angle weight. Also, you can find various types of MS angle weight chart online, depending on the brand that you want to invest in. Also read
Beyond just being aesthetically pleasing, stainless steel angles have many other benefits. Their capacity to withstand heat, abrasion, and corrosion, along with their longevity, affordability, hygienic nature, adaptability, and simplicity of installation, makes them an essential and multipurpose part of the architectural scheme. L&T-SuFin is a business-to-business eCommerce platform that meets all your needs, including MS angles. We offer 24/7 customer support and the opportunity to work with reputable and validated vendors all across the country with delivery to more than 21000+ pin codes.
Monoblock pumps drive industries, farms, businesses, and companies forward. They transfer water, chemicals, and other…
Which one should I get– MIG vs TIG welding? Or which one will be better…
Mono PERC, bifacial, polycrystalline, or TOPCon. These are the names that you usually get when…
Going solar is a great way to save money and help the environment. But to…
Ever thought about how water reaches fields and homes in faraway areas? The answer is…
Sunlight can do more than just light up your day. It can also power homes…